Important Note: These videos are for technique demonstration and operation reference only. While the item in the video may vary slightly in appearance or packaging from our actual stock, the professional functions and usage steps are exactly the same. Thank you for your understanding.
Secure the Clamp: Open the C-clamp and slide it onto the edge of your desk or workstation. Tighten the screw until the base is firm and immovable.
Insert the Lamp: Slot the bottom of the lamp arm into the hole on the top of the C-clamp.
Adjust the Arms: Use the tension knobs on the joints to set the desired height and angle.
Position the Light Bars: You can spread the dual light bars apart (up to 180°) for wide coverage or bring them together for concentrated, shadow-free lighting.
Connect Power: Plug the USB cable into a 5V adapter (e.g., phone charger) or a power bank.
3. Inline Controller Operation
The controller on the power cord features four buttons:
ON/OFF Button: Press to turn the lamp on or off.
Mode Switch (Circular Arrow): Press to toggle between Cool White (best for detail), Warm Yellow (best for relaxing eyes), and Natural Light (best for photography/color matching).
Plus (+): Increase brightness intensity.
Minus (-): Decrease brightness intensity.
4. Professional Features for Salons
Shadow-Free Design: By positioning the two light bars at different angles, you can eliminate shadows caused by your hands or tools.
Eye Protection: Flicker-free LEDs with a high Color Rendering Index (CRI) ensure that colors appear accurate and prevent eye fatigue during lash or nail work.
Space Saving: The clamp-on design frees up valuable space on your workstation compared to traditional base lamps.
5. Maintenance & Safety
Cleaning: Wipe the LED strips and arm with a dry or slightly damp micro-fiber cloth. Do not use chemical cleaners or submerge in water.
USB Power: For maximum brightness, ensure the USB port provides at least 2A of current. Low-power ports (like some old laptop ports) may cause the light to flicker or be dim.
Joint Care: Do not force the arm beyond its natural rotation limits. Periodically check that the clamp is still tight.
